Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

The paper investigates the role of packaging within brand management of FMCG food companies and their attitude towards packaging. This study enhances the understanding of how FMCG food companies actually work and strive to work with packaging..

In Sweden, responsibility for the collection and recycling of packaging and newspapers lies with the producers. Therefore, the major producers created a jointcollection with 5800 recycling stations. The stations are the responsibility of a coordinating body, Förpacknings och Tidningsinsamlingen (FTI) which ensures Government regulations are adhered to by the producers.In 2006, the Swedish Environmental Protection Agency (EPA) carried out an evaluation of the collection of packaging and newspapers. EPA´s research showedthat 80 percent of households were satisfied with the collection but that there were also shortcomings, including problems with littering at the recycling stations.We have tried to approach the litter issue from different angles in order to suggestpossible measures to reduce the problem. An important aspect proved to be uncertainties regarding the concept of operators.As there are currently many parties involved in the collection process this lead to the issue of who is legally considered as the operator of the recycling stations.

The paper investigates the role of packaging within brand management of FMCG food companies and their attitude towards packaging. This study enhances the understanding of how FMCG food companies actually work and strive to work with packaging..

»Does it have to be so green?« is a visual communication project focused on packaging design. I attempted to challenge the clichés of graphic design for organic products and designed a packaging concept for a fictional food brand. The project had a special objec¬tive which was to explore ways to use the package as carrier for in¬formation about the enviromental impact of the packaging itself.The process included research about packaging design and its ef¬fect on the consumer, an investigation of the Swedish market for organic foods, creating and defining a brand, and designing a cohe¬rent packaging concept for a product line which communicates the brand?s values and appeals to the intended target group.The project resulted in prototypes for a muesli package, tea car¬ton and honey jar, as well as a manual that explains the application of the graphic program..

The purpose of this study was to examine how local producers in the food and confectionery segment in Västernorrland, Sweden, working to communicate that the product is locally produced through its packaging design. We have chosen to look at how they work with the right packaging design because it is such an important part of the product marketing. A further aim was to examine how consumers perceive the packaging design of the locally produced products and how they consider that the packaging design communicates the product as locally produced. We have also analyzed the graphical elements contained in the locally produced product packaging through a semiotic analysis.The theoretical framework is based on theories in brand communication and Visual Communication, specializing in packaging design?s visual elements.The method used in this study is a qualitative method.

The purpose of this study was to examine how local producers in the food and confectionery segment in Västernorrland, Sweden, working to communicate that the product is locally produced through its packaging design. We have chosen to look at how they work with the right packaging design because it is such an important part of the product marketing. A further aim was to examine how consumers perceive the packaging design of the locally produced products and how they consider that the packaging design communicates the product as locally produced. We have also analyzed the graphical elements contained in the locally produced product packaging through a semiotic analysis.The theoretical framework is based on theories in brand communication and Visual Communication, specializing in packaging design?s visual elements.The method used in this study is a qualitative method.

This exploratory thesis uses qualitative research to investigate how digital music is beeing packaged. The main study consists of 11 deep interviews with key representatives of the digital music industry in Sweden. These are (record companies) EMI, SonyBMG, Universal, Warner, (DSP) InProdicon, (mobile operators) 3, TeliaSonera and (cell phone producer) SonyEricsson. Packaging is a concept of marketing that has specific implications depending on which good or service that is being packaged. Packaging occurs at different levels in the production chain.

Companies become more and more aware of the added values of the packaging. A well chosen and developed packaging can reduce the costs for the companies through reduced costs for transports, reduced quantity of waste and discards and increased goodwill for example. The companies? costs for salaries can also be reduced due to the increased packaging handling efficiency and the reduced costs for sick leave, reduced work capacity and rehabilitation etc. that can arise when handling poorly developed products and packaging.

The use of silicon carbide (SiC) as a base material in power electronics has manyadvantages, including high breakdown voltage and excellent temperature endurance.However, the packaging of such electronics presents major challenges and there is aneed for packaging that can operate in higher temperature. The purpose of this thesishas been to develop a test method and verify the functionality of SiC powertransistors prototypes with a new packaging technique developed by Swerea IVF AB.It includes setting up an electrical test-bed for power and high temperature cyclingand analysis of the results. Even though test confirmed functionality after thepackaging process, (at room temperature) the performance seemed to have been reduced. This could be a result of the measurement setup and the packaging process.In higher temperature the transistors failed to operate longer than a couple ofminutes which showed the weaknesses in the design and the challenges with this typeof packaging..

This investigation?s task was to map manufacturing of special qualities at Stora Enso Packaging under a certain period, analyze if rules concerning special qualities is followed, which consequences this results in concerning use of paper, waste and costs and to give suggestions on alternative solutions. The goal was to give sugges-tions that help the company to reach its business ratio that the production de-partment uses within use of paper and productivity in the corrugated cardboard machine.Stora Enso Packaging is a part of the forest group Stora Enso and is one of Swe-den?s leading producers of corrugated cardboard. Stora Enso Packaging acts pri-mary on the Swedish market, where they have a market share of 25 %.To be able to analyze orders with special qualities we did a data collection during two months, where we mapped incoming orders.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.

Handling materials and packaging, which is the focus of this study, requires efficient logistics, both internally and between companies. To achieve an efficient material flow, good information systems, whose role is to collect, store, process and distribute information, are required. The assumption that packagings are handled in an efficient manner is currently not a matter of course, when many companies do not prioritize the internal management of the package.The purpose of this report was to investigate how medium-sized businesses working with distribution and handling of spare parts packaging can improve their internal management of packaging. In order to answer the purpose, we have used an abductive process and a qualitative data collection. The study had Logistic Center Ljungby (LCL) at Electrolux Laundry Systems (ELS) as a case company and two other respondents, Nibe in Markaryd and Enertech in Ljungby.